Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
After you have charged your device for 12 hours, the device is ready to be
used. You can now start up the device and begin by calibrating the display,
learning how to use the stylus, and setting up the system’s date and time.
Turn on your device by pressing the power button
on the front panel.
Installing the battery
1. Open the battery compartment by pushing the latch in the direction of the
arrow and lifting up.
2. Position the battery pack, making sure the
battery contacts are aligned with the contacts in
the compartment and the battery is placed on top
of the plastic tab, as shown in the following
illustration.
3. Slide the battery pack into the battery bay while
simultaneously pulling the plastic tab and securing
clip until the battery clicks into place.
4. Replace the battery compartment cover.
Turning on the PA600 II for the first time
Power ON Button
Compartment contacts
Plastic battery tab
Battery securing clip
Plastic tab
Securing clip
