Unitech Electronics Co., Ltd
Created
by Yukiko
PA500 Operation
Manual
V2.0
Page 119 of 123
D1.5 Devices found. Select the host you want to link. Tap “Next ”.
D2. Define Serial port
D2.1. Select Service. Select “Dialup Networking”. Tap “Finish”.
D2.2. Go to “COM Ports” tab, tap “New Outgoing Port”
D2.3. Select the COM port: COM8. Tap OK. (You may select any COM port)
D3. Run VBTerminal tool to connect (VBTerminal can be obtained from
Unitech)
D3.1 Double tap VBterminal tool.
D3.2 Under “Set”, select “setting”.
D3.3 Comport: select 8 (same as D2.3)
D3.4 Buad rate: 115200
D3.5 Tap “Save ”.
D3.6 Save set. Tap “OK”.
D3.7 Select “File” > Connect
D4. Search Host’s Bluetooth com port
Refer to chapter 9.1 A1. (ex: Com port = COM5)
D5. Run Hyper Terminal
D5.1 On your host, run Start/Program/ HyperTerminal.
D5.2 Define a name for the terminal connection.
D5.3 Connection: select COM5 (Host’s Bluetooth COM port)