Unitech MS839, Руководство пользователя

Страница: 9 / 64

3
Chapter 2
Keyboard Interface
As a keyboard Interface, the scanner is actually installed between a PC (or
terminal) and a keyboard. See Figure for reference. The scanner sends data to
the host device by emulating the keyboard input and acts like an extension of
the keyboard.
Installation
This scanner can be installed easily by following the installation guide
illustrated below. Before you start the installation, locate a "Y" type cable in the
package.
Installation procedures:
1) Plug the modular (RJ45) connector of the "Y" cable into the bottom of the
scanner until you hear a click sound.
Installed as a Keyboard Interface
2) Turn off your PC or terminal.
3) Unplug the keyboard from the PC or terminal.
4) Plug the keyboard into a connector of the Y cable that mates with it.
5) Plug the remaining connector of the "Y" cable into the keyboard port of
your PC or terminal.
6) Power up your PC or terminal you press the switch the beam should be
out from the scanner.