- 12 -
© 2021 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS838B
User’s Manual
2.5 Wireless 2.4G Setting
2.4G Receiver Mode *
Scan the
“2.4G Receiver Mode” barcode to enter the 2.4G receiver mode
automatically and connect to the receiver which is matched last time by
default.
One scanner pairing to one receiver is the factory default. If you want to pair
with a new receiver, please refer to the following instructions.
Pairing with new receiver
There are two ways to pair with the new receiver:
A.
Scan the “2.4G Receiver Pairing” barcode.
B. Long press the button for about 16 seconds.
A.
Scan the “2.4G Receiver Pairing” barcode
(1) Remove the original receiver.
(2) Scan the following barcode:
(3) Insert the receiver you want to connect with into your device. You will hear a
short beep when pairing succeeds.
2.4G Receiver Pairing
