Concatenation Configuration Mode
†
The following bar codes are used to configure variable time requirements used to find the
second bar code of the ISBT concatenation sequence.
100 msec to Find Concatenation Sequence
200 msec to Find Concatenation Sequence
300 msec to Find Concatenation Sequence
400 msec to Find Concatenation Sequence
500 msec to Find Concatenation Sequence
600 msec to Find Concatenation, Sequence
700 msec to Find Concatenation Sequence
Pre-Defined Concatenation Configuration Mode
†
The first two bar codes below enable or disable pre-defined concatenation sequences. The
remaining bar codes enable the specific pre-defined concatenation sequence shown, but are
not needed to enable concatenation. They can be used to disable or re-enable any selected
pre-defined concatenation sequence.
Enable Pre-Defined Concatenation Sequence
Disable Pre-Defined Concatenation Sequence
Donation Identification AB0/Rh (D) Blood Groups =á +
=% Concatenation
† This feature is only supported in the MS837 product series.
20
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.