Chapter 2
Using the Hardware
11
4.
Place the finger on the sensor and tap
Is Finger
.
The message “Finger detected!” appears, indicating
that the finger print function is working properly.
Enrolling a Finger Print Stamp
To enroll a finger print.
1.
Tap
Enroll
.
2.
Enter an ID number for the finger print and then tap
OK
.
The following message appears:
After placing the finger on the sensor, a stamp with
the quality percentage and ID number is entered into
the program record.
Verifying the Finger Print Stamp
To verify the finger print stamp.
1.
Tap
Verify
.
2.
Enter the ID number for a finger print stamp to be verified
3.
Tap
OK
4.
The message “Place finger on sensor” appears.
5.
Placing the finger on the sensor to verify if the finger is correct.
The quality percentage number is displayed on the screen for “Pass” or “Fail”.
