To ensure the unit working properly, please keep all connectors away
from the contaminants staying inside of them such as dust, grease,
mud, and water.
The negligence may cause the unit with no communication, short
circuited, Overheated and so on. If the connector is damaged, please
ensure the connector is being fully repaired before using the unit to
avoid causing short circuited.
WARNING!
There is a risk of fire and burns if the battery is handled improperly.
DO NOT disassemble, crush, puncture, short external contacts, or
dispose the battery pack in fire or water.
DO NOT attempt to open or service the battery.
Dispose of used batteries according to local recycling guidelines in
your area.
CAUTION!
Pull the plastic sheet and lift upward to remove the battery.
Remove the Battery
Attach the Wrist Lanyard
1. Thread the end of the wrist lanyard through the
wrist lanyard holes on the bottom of the gun grip.
2. Pull the other end of the wrist lanyard through the
loop on the threaded end.
Copyright 2022 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Learn more about other HT730 UHF accessories
:
If you would like to charge the terminal with other
HT730 UHF accessories, such as 1-Slot / 4-Slot Charging
Cradle, 1-Slot USB Cradle, 1-Slot / 4-Slot Ethernet Cradle,
or charging the battery with the HT730 four slot battery
charger, please scan the barcode below to download
related files:
