manualshive.com logo in svg

Unitech HT660 Wireless edition, Инструкция по установке и эксплуатации

Поделиться
Скачать
Unitech HT660 Wireless edition Скачать руководство пользователя страница 12

5

Step 3 – Remove Protective Screen Film

Installing a New Battery Pack

If you ever have to replace the battery pack, follow these instructions:

1.  Remove the battery door

3.  Move the backup battery switch to the ON position (see below).

4.  Insert the battery pack so that the contacts on the battery pack line up 

with the contacts in the battery compartment. Fully seat the battery.

Charging the Batteries

The main and backup batteries are charged by placing the HT660 in the 
cradle/docking station (fi rst connect the power supply to the Docking Station).

First Time to Charge the Main Battery & Backup Battery

We would like to propose to charge the battery at least up to 12 hours for the 
fi rst time to use. While it normally only takes about 4 hours to charge the bat-
tery after it’s been drained, when charging the battery for the fi rst time please 
allow at least 12 hours. While charging the main battery the backup battery 
should also be charged. Please make sure the backup battery has been 
switched “ON” (this cannot be emphasized enough).

Z 

CAUTION: 

There is a high risk of data loss from RAM if the backup battery is 

not fully charged. This can happen if the main battery has been drained and 
the unit is not connected to the AC adaptor. For this reason, it is crucial that 
the backup battery is switched on before charging the main battery for the 
fi rst time.

Step 3 – Remove Protective Screen Film

To protect screen, the HT660 has been provided with a protective plastic 
fi lm. You may remove it (if desired). The screen will be more susceptible to 
scratching without the fi lm, but will be more readable.

Содержание HT660 Wireless edition



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды