Unitech ES922 Скачать руководство пользователя страница 85

Страница: 85 / 122

The composite component will be either a CC-A (encoding up to 56 digits), a CC-B (up to 338 digits) or a

CC-C (up to 2361 digits).

GS1-128 Composite

GS1 DataBar Stacked Composite

GS1 DataBar Expanded Stacked Composite

GS1 DataBar Composite

UPC-E Composite

EAN-13 Composite

GS1 composite version enabled:



Note 1-

While this feature is enabled, the decode speed will be dropped. The more versions are

enabled, the more obvious influence.



Note 2-

If the corresponding linear 1D barcode symbol is set disable, only 2D composite data will be

output after a success decode.



Note 3-

While this feature is set disable, if the corresponding linear 1D barcode symbol is set enable,

only 1D data will be output after a success decode.



Note 4-

For UPC/EAN Composite, if 2D composite component is failed to decode and 1D linear

component is successful to decode, then only 1D data will be output.



Note 5-

If both GS-128 and DataBar Composite are set Enable, both 1D and 2D components must

be successfully decoded to output both 1D and 2D data.

GS1-128 Composite, DataBar Composite -

Two versions of GS1 Composite symbol are enabled.

GS1-128 Composite, DataBar Composite, UPC/EAN Composite -

Three versions of GS1 Composite

symbol are enabled.

Multiple-scan setting

Single-scan setting

Option barcode

Option

Alpha. entry

Содержание ES922



























































































































Результаты поиска

Содержание ES922

Отзывы:

Бренды по названию

Популярные бренды

Unitech ES922, Руководство пользователя

Результаты поиска

Содержание ES922

Отзывы:

Бренды по названию

Популярные бренды