Unitec YFML-720, Руководство пользователя

Страница: 6 / 17

6
3
、
Type Introduction
Y FM L 720 920 1200
Max. Width (mm)
Separating unit
Laminating unit
Hydraulic system
4
、
Structure and Working Principle
This machine mainly includes laminating unit and paper separating unit. The
laminating unit is consisted of heating roller, hydraulic system and film cutting
and perforating device; and the separating unit is consisted of anti-curve device,
paper separating unit and paper receiving table. (See the drawing 1)
Working principle: Feed the paper, and laminate with the heated film, get
across the anti-curve device, then the laminated paper was separated by the
separating unit and then finish the lamination process.
5
、
Installation and Use of machine
5.1
、
Please check whether each part of machine is all right when first time to use
this machine, and the machine should be placed evenly.
5.2
、
You should assemble the paper feeder and paper receiving table on the
machine according to schematic diagram before using it, because the machine
was disconnected when it was packed up.
5.3
、
This machine has itself oil-supply system, the oil tank should be filled with
the oil before the machine being used, the oil should be chosen 46# in the
summer, 23# in the winter, and the oil must be filtered by the air filter then filled
in oil tank.
5.4
、
Connect the power, and make sure the machine is in good grounding
condition.
5.5 Installation of film (Drawing 2, see from back of machine)
5.5.1 The drawing2 is the film shaft; take down the two thimbles and press them
into paper roll of film.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn