![background image](http://html.mh-extra.com/html/unitec/ssa-003/ssa-003_manual_844154046.webp)
46
3-7 Bad paper feeding
(A) The paper guide plate is made too tightly; use the
micro-adjusting nut to readjust it.
(B) Paper feeding problem may occur in case of an improper
paper. Please confirm the followings.
①
Too thick (over 0.35mm), too thin (below 0.20mm)
②
Too small or too big size of paper
③
Too many papers are placed. No more than 3mm and no more over
the red line.
④
Excessively rolled paper
╳
√
Please do not use the paper shown above, or else bad paper
feeding, bad cutting; non-aligned paper etc failures would occur.
【
Can not use
】
:Laterally rolled paper.
【
Can use
】
:Longitudinally rolled paper, but, the rolled degree is
limited within 5mm and the rolled portion must be
made flatted.
文件使用
"pdfFactory Pro"
试用版本创建
Содержание SSA-003
