Unitec SSA-001, Руководство пользователя

Страница: 32 / 46

32
2-8 Way of adjustment to cut different thickness of paper
When out of factory, the thickness adjustment needle points to the middle,
which means cutting 250g (about 0.25mm) thickness paper.
(A) If cutting paper that thicker than 250g (or 0.25mm):
①
Loosen the lock nut;
②
Rotate the needle to "+" direction by cross-screwdriver; (It's 0.02mm
thickness corresponding to each space)
③
Tighten the lock nut.
(B) If cutting paper that thinner than 250g (or 0.25mm):
①
Loosen the lock nut
②
Rotate the needle to "-" direction by cross-screwdriver. (It's 0.02mm
thickness corresponding to each space)
③
Tighten the lock nut.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn