16
4.4 Indicatore dell’umidità dell’aria
Figura 7
Questo prodotto può rilevare l’umidità ambientale e avvertire
qualora l’umidità dell’aria sia anomala (quando l’umidità
dell’aria è > 90% RH – vedere figura 7)
4.5 Funzioni dei tasti
SET/AUTO:
Premere brevemente il tasto e scegliere manualmente l’indicatore di temperatura,
umidità dell’aria, CO2 e indicazione di scorrimento automatico
Pressione prolungata
➞
Conversione dell’unità di temperatura tra °C e °F.
TEST/HUSH:
Premere il tasto brevemente per mettere in muto l’indicatore per 10 minuti
Pressione prolungata
➞
Allarme di test CO2
Combinazione di tasti:
Premere i due tasti contemporaneamente per 3 secondi per cambiare il tipo di lingua (sono supportate le seguenti
lingue: tedesco, inglese, francese, italiano, spagnolo e neerlandese)
4.6 Rilevamento della luce nell’ambiente
Se la concentrazione di CO2, la temperatura e l’umidità dell’aria rientrano nel campo normale e la temperatura ambientale è molto bassa
(ad es. di notte), allora il misuratore riduce automaticamente la luminosità del display, in modo da non disturbare eventualmente il sonno.
5. Installazione
Il misuratore di CO2 supporta sia il posizionamento indipendente, sia il montaggio a parete.
Metodo di installazione a parete:
Selezionare il luogo di installazione adatto e assicurarsi che non siano presenti fili e tubi nelle vicinanze o all’interno della parete. Per allentare
la piastra di montaggio, ruotarla sul lato inferiore del misuratore in senso orario. Determinare la posizione delle due viti di fissaggio sulla
copertura del lato inferiore. La distanza dei due fori è di 58mm. Realizzare due fori profondi circa 30 ~ 40mm nella parete (diametro 5mm).
Inserire dunque i tasselli in dotazione nei fori perforati e applicare le viti (vedere figura 8)
Figura 8
4008153021879_BDA_DE_A5_lang_1220.indd 16
4008153021879_BDA_DE_A5_lang_1220.indd 16
14.12.20 12:50
14.12.20 12:50