P n e u m a t i c
D r i l l
2 1 3 1 0 0 0 1 0 - 0 0 2 0 , 2 1 3 1 1 0 0 1 0
SAFETY INSTRUCTIONS
Any tool can be dangerous. Please follow these simple safety
procedures - they are for your personal protection.
%
Do not use this machine in any way other than as directed by these operating instructions.
%
Hold the machine tight during operation. When operating with the hammer drill also use the
second handle.
%
Regular maintenance is essential - check all screws, fittings etc. for tightness.
%
Check the air hose for damage.
%
Use only lubricated air during work.
%
Never use dull tools or bits.
%
Avoid sparks in hazardous environment - created by the drill. In this case flush material and
drill always with sufficient water for cooling during use.
%
Wear safety-glasses, non-slip gloves, protective clothing and ear protectors.
%
Ensure that you maintain a safe working position.
%
Never work under the influence of alcohol, drugs or strong medication.
%
Always disconnect machine from the air line for changing drills or working on the machine.
%
Remove rings, watches, ties etc. that could be torn by the machine.
%
Follow the general current and appropriate
Accident Prevention and Safety Procedures.
WARNING!
Never use the flexible hose as a lifting handle.
Your safety is in your hand!
Observe these instructions!
Noise and vibration levels
Typically A-weighted noise level of the machine is:
%
Sound pressure level: 88.8 dB(A)
Wear ear protection.
The typical weighted acceleration is 2.23 m/s
2
.
n
e
_
0
1
0
0
1
1
3
1
2
_
0
2
_
0
1
0
0
0
1
3
1
2
8
0
.
3
0
.
5
2
:
d
e
li
p
m
o
C
CS Unitec, Inc
22 Harbor Ave
USA
Norwalk, CT 06850
Phone: (203) 853 9522 Fax: (203) 853 9921 [email protected]
Page 4 of 20
