UNITEC Climate W129-1, Руководство пользователя

Страница: 5 / 12

5 English
BATTERY INSTALLATION
Home Receiver:
Lift off the battery cover
7
at the back, install 2 pcs
AAA batteries according to the polarity indicated,
close the battery cover
7
.
LOW BATTERY INDICATION
Low battery indication is available for the unit.
Replace the batteries and follow the setup
procedure as mentioned in this instruction manual.
CLOCK & CALENDAR SETTING
Hold “SET”
1
button for 3 seconds to enter clock
set. Using “+
2
, –
3
” to adjust and “SET”
1
to confirm, the following values can be set in
sequence:
12/ 24 hr > Year > Month > Date > Hour > Minutes
C/F SELECTION ON THE HOME UNIT
Press “–”
3
button to select C and F
ALARM SETTING
Hold “AL“
5
for 3 seconds. Press “+
2
, –
3
” to
enter the desired value and press “AL”
5
to confirm
setting. To view alarm time, simply press “AL”
5
button to read.
The alarm time will display for 5 seconds and resu-
me normal clock thereafter.
To turn AL on and off, press “+”
2
button. The
unit will provide Crescendo alarm which last for 2
minutes.
MAX/MIN MEMORY
Press “MAX/MIN”
4
key to display the maximum
records of indoor temp, indoor humidity and outdoor
temp for 5 seconds. Press “MAX/MIN”
4
key again
to display the minimum records of these 3 readings
for 5 seconds
WEATHER REpORT
4 resolutions:
SUN SUN + CLOUD + CLOUD +
CLOUD RAIN SNOW
Display weather after power-up. then EVERY 6 hours
for a weather icon update.
BATTERY DISpOSAL
Replace only with the same or equivalent type
recommended by the manufacturer.
Please disposal of old, defective batteries in an
environmentally friendly manner in accordance with
the relevant legislation.
Attention should be drawn to the environmental
aspects of battery disposal.
TECHNICAL DATA
Power supply of main unit: 2 x 1.5V
Battery type of main unit: 2 x AAA / LR03 / AM4
Temperature range of main unit: 0 ºC to +50ºC
Temperature tolerance of main unit: +/-1 ºC
Humidity range of main unit: 20% to 99% RH
Humidity tolerance of main unit: +/-5%
Operating temperature: 0 ºC – 50 ºC
Temperature display resolution: 0.1 ºC
Humidity resolution: 1%
Temp. Range of wired sensor: –20 ºC to +70ºC
313516.00_W129_1_Manual.indd 5 16.01.14 13:18