6.
Press spraying water button a couple of times to moisten the laundry if necessary, before
spraying make sure that there is enough water in water tank.
7.
Steam shot function had better be used at max temperature, as it helps remove stubborn creases.
8.
The iron has an anti-drip function. If iron long during is not used, the sole cools steam
generation is automatically switched off to prevent drip through the holes of the sole.
9.
“Steam shot” can also be applied when holding the iron in a vertical position. This is useful for
removing creases from hanging clothes, curtains, etc.
Cleaning and maintenance.
After use.
1.
Disconnect power supply and empty the water left in water tank.
2.
Wait for the sole completely cool before you remove the iron.
3.
Wipe the iron soft, damp cloth. Do not use solvents to clean the soleplate and abrasive cleaners.
4.
Store the iron in an upright position. Avoid scratching the sole.
Self-clean function.
It is necessary to regularly clean the iron, depending on the water hardness and intensity of use.
1.
Fill water into the water tank and set the temperature selector to Max position
2.
Connect the iron to the network. Make sure the steam regulator is set to “Off”.
Warning: Never pour vinegar or other liquid cleaners for eliminating calcium into water tank!
3.
Once the iron is hot and the indicator light will turn off. Hold the iron over a sink, press and
hold button self-cleaning "G". The steam and boiling water will come out through the holes in
the sole of washing away scale and impurities.
4.
Release the button self-cleaning as soon as the water in the tank is over.
Auto-decalcification function
Iron equipped system Auto-decalcification (Anti-Calc). Thanks to it, reduces the rate of scale formation.
Operating tips
-
As the iron heats up faster than it cools down, it is recommended to begin ironing with the fabrics
requiring the lowest ironing temperature, such as synthetic fabrics.
- If the fabric contains several kinds of fibres, select the temperature for the tissue in which the canvas
of the greatest content. For example: if the fabric contains 60% polyester and 40% cotton, you should
select the temperature corresponding to polyester and to iron without steam.
- Silk and other fabrics that are likely to become shiny should be ironed on the inner side. To prevent
staining do not spray water straight on silk or other delicate fabrics.
3
