Unit UGR-465, Инструкция по эксплуатации

Страница: 22 / 24

22
Meat grinder | UGR-465 / UGR-466
ENGLISH
CLEANING AND CARE
Clean the meat grinder after each use.
Clean the meat grinder immediately after finishing work with it.
Before disassembling and cleaning the meat grinder, turn it off using the mode
switch, and then unplug it. Unscrew the fixing ring and remove all attachments
from the snake and remove the snake from the head. Press the lock button and
remove it. Remove the pusher and the hopper plate.
Wash all the parts that come into contact with the products with running water
using mild detergents. Then rinse them with clean hot water and immediately
wipe dry. It is recommended to grease the knife and grilles with vegetable oil.
Attention: the parts of the meat grinder should not be washed in the
dishwasher. Store the meat grinder in a cool dry place.
Unclogging
1. If the meat stuck in the head during the operation, turn off the meat grinder
by pressing [POWER] – the engine should stop working.
2. Then turn the button [REV] – the snake will rotate in the opposite direction
while the button is pressed and the clog will be eliminated.
After removing the blockage, you can continue working as usual. If the blockage
is not eliminated, disconnect the grinder from the mains, disassemble it and
remove the clog by your hands.