Unit UEK-274, Инструкция по эксплуатации

Страница: 7 / 20

7
Electric kettle | UEK-274
ENGLISH
BEFORE THE FIRST USE
• Take all the parts of the appliance out of the packing, and remove all labels
and stickers. Clean the kettle thoroughly. Wipe with a damp cloth.
• Before switching on, make sure that the voltage of your supply is the same as
indicated on the bottom of the kettle (220-240 V ~ 50 Hz).
• Fill the kettle with the maximum quantity of the cold up to the «MAX» mark
and boil the water pour out and boil again – 2-3 times. Each time pouring out
the boiled water.
• Discard the boiled water and rinse the kettle out with cold water before the
first use. Do not use this water in cooking, pour it away.
APPLIANCE USE
Positioning
• Put the Power Base (6) stable, level surface.
• Route the power cord so that it does not overhang the work surface, and can-
not be caught accidentally. Shorten the power cord by winding it round the
cord storage area under the Power Base (6), and bring out of the cord exit cut
into the Power Base (6).
• Lift the Lid (2), fill the kettle with the desired amount of cold water (between
the «MAX» and «MIN» marks), and close the Lid (2).
• Depress the Switch (5) to start the kettle heating. The Indicator Light (7) on the
kettle will light up.
• When the water has boiled, the kettle will automatically turn off. It required
the water may be brought back to the boil by waiting a few seconds and de-
pressing the Switch (5) again.
Opening the lid
Remove the kettle on the Power Base (6). If the Switch (5) has been push down
inadvertently, it will spring up in to the «OFF» position.
Warning: if the kettle has just boiled, it will be full of steam, which will escape as soon as the Lid (2) is
open. Open the Lid (2) carefully and wait when the steam will go out.