2.2
Rate
of
Change
Icon
The rate of change icon
detects rapid changes in temperature and humidity. If the arrow
points upward, the temperature is increasing at a rate of +2°C per 30 minutes (or greater), or humidity
is increasing at a rate of +5% per 30 minutes (or greater). If the arrow points downward, the
temperature is decreasing at a rate of -2°C per 30 minutes (or less), or humidity is decreasing at a rate
of -5% per 30 minutes (or less).
3
Indoor
Thermo
Hygrometer
Sensor
Operation
Note:
The indoor sensor has three buttons for easy operation:
MIN/MAX/-
button,
SET
button,
and
CH/+
button.
3.1
Indoor
Sensor
Channel
Setting
Press and hold the
CH/+
button 3 seconds to switch the display scroll mode
. In scroll mode,
press the
CH/+
button display between the 1 through 8 channel, Press and hold the
CH/+
button 3
seconds to exit channel setting, disappear
scroll mode.
Note: BEFORE
inserting the receiver batteries, To set each indoor sensor channel number
FIRST
(the default is Channel 1 , Outdoor sensor default is Channel 1) ,The FT012TH supports up to
eight transmitters.
3.2
Min/Max
Mode
The Min/Max mode displays the minimum and maximum temperature and humidity (since reset of the
unit) for the indoor sensor.
1.
Display Maximum
. Press the
MIN/MAX
button once to display the maximum. The
MAX
icon will be displayed.
2.
Clear Maximum.
To reset the maximum values to the current values,
press and hold
the
MIN/MAX
button for 3 seconds.
3.
Display Minimum
. Press the
MIN/MAX
button again to display the minimum. The
MIN
icon will be displayed.
4.
Clear Minimum.
To reset the minimum values to the current values,
press and hold
the
MIN/MAX
button for 3 seconds.
To return to normal mode, press the
MIN/MAX
button again.
3.3
Clearing
Min/Max
Daily
The minimum and maximum can be set to clear daily (at midnight) or manually. Press and hold the
SET
button for 3 seconds to switch between
and Clears Manually.
When you manually clear the minimum and maximum, the Clears 24h function will clear every
0:00
hours from the time you clear it.
3.4
Temperature
Units
of
Measure
The default temperature units of measure are degrees Celsius. To toggle between degrees Celsius and
