UNIT 1 FARO, Руководство пользователя

Страница: 17 / 23

16
EN 5. More aboult your helmet
No helmet can protect the wearer against all posible impacts. A severe impact, sharp object,
imporoper use, or incorrect adjustment could cause conditions beyond the protection of the helmet.
To be effective, a helmet must fit and be worn correctly. The helmet is designed to be retained by a
strap under the lower jaw. To check for correct fit, place the helmet on your head and make any
adjustments inducated. Securely fasten retention system. Grasp the helmet and try to rotate it to the
front and rear. A correctly fitted helmet should be comfortable and should not move foward to
obscure vision or reaward to expose the forehead. Failing to properly position the helmet can result
in sereious injury to you or others.
The helmet is designed to absorb shock by partial destruction of the shell and liner. This damage
may not be visible. Therefore, if subjected to a severe blow, the helmet should be destroyed and
replaced even if it appears undamaged. The helmet has a limited lifespan in use and should be
replaced when it shows obvious signs of wear. Helmets parts lose strength over time, so even if the
helmet has not been impacted or damaged, replace it after three years.
General safety
Regulatory
FARO was designed to comply with most International Safety Certifications and meets C.P.S.C. 16 CFR
Part 1203 United States Federal Safety Standard for Bicycle Helmets (Consumer Product Safety
Commission) and with the CE, EN1078:2012 +A1:2012 Helmets for pedal cyclists, Skateboarders or
Rollerskaters (European Safety Standard).