![Unistellar eVscope eQuinox Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/unistellar/evscope-equinox/evscope-equinox_user-manual_3951183005.webp)
Page 5
eVscope eQquinox V1.1
2. Adjust the legs to put the bubble level in the middle of the black circle, as in the image.
Note: each time you move your eVscope, we recommend resetting the level bubble.
3. Loosen the 2 tripod screws. Install your eVscope vertically on the tripod and tighten the screws. Be
careful not to tighten it too hard.
4. Start the eVscope by pressing the ON button for 2 seconds. When you see a red light, the eVscope
is on and ready to use.
Warning:
if you turn on your eVscope in daylight, you might not see the button light because of its
low intensity. It has been set up like this,
so it won’t dazzle you at night.
Battery is not fully charged when shipped.