Unison Research Unico 50, Руководство пользователя

Страница: 8 / 11

Unison Research Unico 150
17
Line outputs:
sub out
This output provides an audio signal buffered from the selected
input; the level of output is determined by the position of the
volume knob — the output does not have a limited bandwidth.
monitor
This output provides an audio signal buffered from the selected
Input; the output level is fixed.
Bypass input:
This input allows the Unico 150 to be used as a power amplifier.
The audio signal from this connector goes directly to the
mainboard, bypassing the input selector and volume control (i.e.
the ‘pre-amp’ stage).
ATTENTION! :
Only select the bypass input when the amplifier is turned off and the
source volume is set to minimum. Turn on the source first, and then the
Unico 150.
Selecting the bypass input with the amplifier already turned on may
produce noise on the outputs.
Only select the bypass input if it is actually connected to a source.