background image

4

n

otice

 

to

 p

urchaSer

This product is for research use only ⸀ Not for use in human diagnostic or 
therapeutic procedures ⸀

W

arning

Microsensors have very pointed tips and must be handled with care to avoid 
personal injury and only by trained personnel ⸀
Unisense A/S recommends users to attend instruction courses to ensure proper 
use of the products ⸀

W

arranty

 

and

 l

iaBility

 

The MicroProfiling System is covered by a one year limited warranty ⸀

The warranty does not include repair or replacement necessitated by accident, 
neglect, misuse, unauthorized repair, or modification of the product ⸀ In no event 
will Unisense A/S be liable for any direct, indirect, consequential or incidental 
damages, including lost profits, or for any claim by any third party, arising out of 
the use, the results of use, or the inability to use this product ⸀

Unisense mechanical and electronic laboratory instruments must only be 
used under normal laboratory conditions in a dry and clean and environment ⸀ 
Unisense assumes no liability for damages on laboratory instruments due to 
unintended field use or exposure to dust, humidity or corrosive environments ⸀

r

epair

 

or

 a

djuStment

 

Sensors and electrodes cannot be repaired ⸀ Equipment that is not covered 
by the warranty will, if possible, be repaired by Unisense A/S with appropriate 
charges paid by the customer ⸀ In case of return of equipment please contact us 
for return authorization ⸀ 
For further information please see the documents Conditions for Sale and 
Delivery for Unisense and Warranty and Shipping Information as well as the 
manuals for the respective products ⸀

WARRANTY AND LIABILITY

Содержание MultiChannel UniAmp



















Отзывы: