other electric appliance, the Commander must learn the original code
from the other electric appliance, take the TV remote as an example:
7.1. Set the device to be learned by pressing key “AV” or “TV” on the
Commander, if you want to learn the TV Remote, please press the TV key,
The LED blue light will flash, if AV, the LED orange light will flash
7.2. Press key “set” for about 2 seconds until LED is on steady and then
the Commander enters learning mode. Then tap the key you want
to copy and LED will flash one time, When the light is on steady
that means keyboard is waiting for signal from original remote to
begin learning.
7.3. Approach the TV remote about 10mm in front of the Commander ,
aim both IR Emitters at each other, then press the KEY on the TV
remote for about 1 seconds, then release this key and you will see
LED on the Commander flash 3 time. When the light is on steady
that means your Commander has learned the original code
of the
TV Remote successfully.
7.4. Repeat step 7.2 and 7.3 to complete other syncing of the original
remote. (LED will go out and quit learning mode if no operation within
10 seconds)
7.5. Press the “set” key to save and quit the learning mode when all keys
are finished original code learning mode
