TECHNICAL SPECIFICATIONS
Transmission mode
:
Digital Hopping System
Carrier frequency
: 2.4GHz
Operating voltage
: Transmitter: 5V 550mA
Receiver: 3.7V 350mA Lithium Polymer Battery
Frequency response
: 30 Hz – 20 KHz
Distortion
: < 0.5%
Signal-to-noise ratio
: > 75 dB
Range
: Up to 20 meters (open area)
TROUBLESHOOTING
NO SOUND
-
Ensure that the mains adapter is pushed fully into the power outlet and
that its cable is properly connected to the DC IN connector on the
transmitter.
-
Ensure that the Transmitter and the Headset Receiver Power ON/OFF
switch is switched to ON.
-
The charge level of Battery inside Headset Receiver may be too low.
Recharge the battery.
-
Ensure that the TV set, Hi-Fi system or audio component is switched
ON and set to a channel that broadcasts an audio signal.
-
Use the Volume Control on the Headset Receiver to increase the sound
level.
-
The connected audio/video equipment may not be in playback mode.
Start playback on by the equipment.
-
The Headset Receiver output level is set too low. Adjust the volume to
a suitable level.
DISTORTION
-
The charge level of Battery inside Headset Receiver may be too low.
Recharge the battery.
-
The Headset Receiver may be too far away from the Transmitter. Move
the Headset Receiver closer and facing to the Transmitter.
-
The Audio Signal input level is too low. Increase the volume from the
audio source.
