Unique UGP-30RH PL1 Скачать руководство пользователя страница 3

Страница: 3 / 23

SAFETY NOTICE

Approved for residential type units for residential use only read

these instructions and be safe.

Please read these instructions completely before starting.

The installation of the appliance must respect all codes.

Important:

Save these instruction so that you can provide the elec-

trical inspector in your area.

Safety Warning:

Turn off the circuit in the electrical panel and lock

front panel to connect the cord of this unit.

Power requirement:

110V-120V/60HZ

CAUTION:

USE THIS PRODUCT FOR GENERAL FAN ONLY. DO NOT

USE THIS PRODUCT TO EXHAUST FUMES OR HAZARDOUS OR

EXPLOSIVE MATERIALS.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK

OR INJURY TO PEOPLE, OBSERVE THE FOLLOWING:
1. Use this unit only for the purposes intended by the manufacturer.

If you have any questions about this product, contact the manufac-

turer.
2. Before the machine’s maintenance or cleaning, turn off the electri-

cal panel and lock the panel blocking feature to prevent from acci-

dentally activating the power. If it is not possible to lock the access

panel, attach a highly visible label to the electrical panel.
3. A qualified person should perform the installation and wiring of

the electricity in accordance with all codes and all standards, includ-

ing fire resistance rating.
4. When you use hood together with stove, please do not close

the window and door of the kitchen. Because during the fuel stove

working, which will consume lots of air, so do open the door and

window to make the kitchen ventilating, to avoid any suffocation.
5. It is important to provide sufficient air for proper combustion of

heating equipment and proper evacuation of gases through the

chimney pipe to prevent back flow of air. Follow the instructions and

safety standards of the manufacturers of heating equipment, such as

those published by the National Fire Protection Association (NFPA),

the American Society for Heating, Refrigeration and Air Condition-

ing Engineers (ASJRAE) and the code authorities in your area.

Содержание UGP-30RH PL1
























Результаты поиска

Содержание UGP-30RH PL1

Отзывы:

Бренды по названию

Популярные бренды

Unique UGP-30RH PL1, Руководство пользователя

Результаты поиска

Содержание UGP-30RH PL1

Отзывы:

Бренды по названию

Популярные бренды