24
7. Use a 7mm wrench to remove the orifices. Each orifice can be accessed easily
- the larger burner orifice is located on the burner wall.
8. Remove all NG orifices, place in the bag and store in a safe place.
9. Take the LPG orifices provided and install them as shown below.
See below for rating of orifice for each model
24” Model
Smallest
Medium x 2
Largest
Oven
Broil
LPG
0.57 mm
0.93 mm
1.00 mm
1.07 mm
0.93 mm
10. Once all the orifices are installed, replace all burners and burner caps, then
fire up the burners to check the minimum flame height.
To replace the oven burner orifice
1. Open oven door.
2. Remove all racks, then the bottom pan by lifting up
the back first to release the front then pull pan out.
3. Locate the burner tube and locate the retaining
screw at the front of the tube. Once this screw has
been removed, lift up the burner and pull away
slightly
to expose the oven orifice.
4. With a 7mm wrench remove the orifice and replace with LPG orifices.
5. Replace the burner tube, then start up the oven to check oven flame, making
sure it’s tight and blue. Adjust the air shutter at the back of the burner tube to
achieve this. Once you have the bottom pan and oven door closed, you will be
able to see how the flame should look by viewing the flame through the door.
To replace the broiler burner orifice
1. Open oven door.
2. Locate the burner tube on the top of the oven cavity and locate the retaining
screw at the front of the tube. Once this screw has been removed, lift up the
burner and pull away
slightly
to expose the broiler orifice.
3. With a 7mm wrench remove the orifice and replace with LPG orifices.
4. Replace the burner tube, then start up the broiler to check oven flame, making
sure it’s tight and blue. Adjust the air shutter at the back of the burner tube to
achieve this.
GAS RANGE CONVERSION (continued)
Orifice
Wrench
