background image

6

TROUBLESHOOTING

REGULAR MAINTENANCE

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Solar panel is exposed to 
sunlight but the charging 
indicator is not lit.

Battery is not properly connected 
to the solar panel or the sunlight 
is too weak.

1. Check all connections to make sure 
the solar panel is properly connected to 
the battery.
2. Wait until the sun shines more 
brightly or the weather condition 
imporves.

Without load, battery 
indicators stay at the same 
level even after charging for 
a long period of time.

The battery is damaged or has 
died and no longer holds an 
adequate charge.

Replace the battery.

Battery indicator 1 flashes 
red, no output.

The battery is over-discharged.

Disconnect the load from the battery 
and charge the battery for a longer 
period of time.

LED indicators randomly 
flash.

The battery is not properly 
connected.

Disconnect the battery and remove all 
the cables from the solar panel and the 
battery, repeat set-up procedure shown 
on page 3.

To maintain the long-term and trouble-free performance of your solar panel system, it is recom-
mended that you follow these guidelines prior to each operation:
• Always check to ensure that the product is clean and in good working condition with no visible 

defects or damage.

• Make sure that the ventilation holes are not blocked and that the fan is in good working condition.
• Ensure that the environment where the solar panel system is going to be placed has adequate 

ventilation.

• Make sure that all connection cables and extension cables are undamaged and in good working 

order.

• Make sure all connectors are clean and free of dust, debris and/or rust.

Содержание UGP-100WSP









Отзывы: