3
SAFETY NOTICES
Approved for residential type units for residential use only read these
instructions and be safe.
Please read these instructions completely before starting.
The installation of the appliance must respect all codes.
Important:
Save these instruction so that you can provide the electrical
inspector in your area.
Safety Warning:
Turn off the circuit in the electrical panel and lock
front panel to connect the cord of this unit.
Power Requirement:
110V-120V/60HZ
CAUTION:
USE THIS PRODUCT FOR GENERAL FAN ONLY. DO
NOT USE THIS PRODUCT TO EXHAUST FUMES OR HAZARDOUS OR
EXPLOSIVE MATERIALS.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK
OR INJURY TO PEOPLE, OBSERVE THE FOLLOWING:
1. Use this unit only for the purposes intended by the manufacturer.
If you have any questions about this product, contact the
manufacturer.
2. Before the machine’s maintenance or cleaning, turn off the
electrical panel and lock the panel blocking feature to prevent from
accidentally activating the power. If it is not possible to lock the
access panel, attach a highly visible label to the electrical panel.
3. A qualified person should perform the installation and wiring of the
electricity in accordance with all codes and all standards, including
fire resistance rating.
4. When you use hood together with stove, please do not close the
window and door of the kitchen. Because during the fuel stove
working, which will consume lots of air, so do open the door and
window to make the kitchen ventilating, to avoid any suffocation.
5. It is important to provide sufficient air for proper combustion of
heating equipment and proper evacuation of gases through the
chimney pipe to prevent back flow of air. Follow the instructions and
safety standards of the manufacturers of heating equipment, such as
those published by the National Fire Protection Association (NFPA),
the American Society for Heating, Refrigeration and Air Conditioning
Engineers (ASJRAE) and the code authorities in your area.
6. When cutting or drilling into wall or ceiling, be sure not to damage
electrical wiring or other access to public service.
7. Always evacuate outside the conduit system.
