Unique CLASSIC RETRO UGP-24CR RH B, Руководство пользователя

Страница: 8 / 24

8
PRE INSTALLATION
DUCT PLANNING
•
The ventilation hood is equipped for 8” round ducts. This hood can
be ventilated vertically through the top cabinet or ceiling. A duct
transition piece is provided for vertical exhaust. You can use elbows
(sold separately) to ventilate horizontally through the rear wall.
•
Determine the exact position of the hood.
•
Plan the route to vent the ventilation duct to the outside.
•
Use the shortest and straightest path possible. For satisfactory
performance, the length of the duct should not exceed 12.5 feet of
equivalent length for all duct configurations.
•
Use only metal ducts.
WALL FRAMING FOR ADEQUATE SUPPORT
WARNING
THESE VENT HOODS ARE HEAVY. ADEQUATE STRUCTURAL
SUPPORT IS REQUIRED.
Aluminum
Foil Tape
Hammer
NECESSARY TOOLS
Marker or
pencil
Safety
Gloves
Level
Utility knife Stud finder
Powered
screwdriver or
drill
Measuring
tape
Flat-blade
and Phillips
screwdrivers