background image

VIVID_Troubleshooting_Doc_REVA.docx 

Flex Gold

 

VIVID Lamps 

Troubleshooting Guide

 

If you do not have the original mobile device 
the lamps were synced to

, you will need to 

manually reset the lamps:

 

1. Turn lamp on for 15 seconds. Turn on/off

with any 12 volt power source. Even touching
a 9 volt battery to the pins on the lamp will
work.

*Note: 

Only 

power on/off the lamps

that you want to reset.

2. Turn lamp off for 5 seconds

3. Repeat this on/off cycle four more times, or

until the lamp(s) turn white and start to strobe
from bright to

You should now be able to add a new device to the 
app.

 

Figure F 

 Figure G 

 Figure H 

Содержание Flex Gold VIVID

Страница 1: ...p 2 select Settings 3 Choice option to Find Password or Change Password See figure B below Note Lamps can be accessed from any mobile device by using the same Bluetooth password Figure A Figure B Check device distance from lamp Move closer to lens face of lamp you are trying to connect so that the mobile device is directly over or under the lens face If you are within proper range and the lamp is ...

Страница 2: ...ing features If the lamp did not turn on off move to the next lamp on the app and try again Continue until you find the lamp you are trying to control See figure C below Controlling the lamp features Press and hold the icon of the lamp you would like to control This will take you to the menu screen where you can control the dimming and color changing features See figure D below The is a green icon...

Страница 3: ... to reset to bring up the Menu screen 2 Select the Edit icon 3 Select the Reset and Delete button See figure F below An alert will pop up to confirm that you want to delete that lamp See figure F below Toreset all lamps 1 Select the gear icon at the top right corner of VIVID app page 2 Select Settings 3 Select the Delete All Lamps option See figure Gbelow An alert will pop up asking to confirm tha...

Страница 4: ...mp on for 15 seconds Turn on off with any 12 volt power source Even touching a 9 volt battery to the pins on the lamp will work Note Only power on off the lamps that you want to reset 2 Turn lamp off for 5 seconds 3 Repeat this on off cycle four more times or until the lamp s turn white and start to strobe from bright to You should now be able to add a new device to the app Figure F Figure G Figur...

Отзывы: