1
0
(1) Remove the gasket door(A10) from door plate.
(2) Remove door plate(A07) from door frame.
(3) Remove two screws (A11) from door frame.
(4) Remove the door handle (A01) and handle supporter (A02) from door frame.
(5) Remove two screws (A04) from door frame.
(6) Remove barrier screen *O sealing AS (A05) from door frame.
(7) Remove the stopper hinge top(A06) from door plate.
(8) Remove the spring(A09) and the hook(A08).
(9) Reverse the above steps for reassembly.
4. Method to reduce the gap between the door seal and the oven front surface.
(1) To reduce gap located on part ‘A’.
• Loosen two screws on stopper hinge top, and then push the door
to contact the door seal to oven front surface.
• Tighten two screws.
(2) To reduce gap located on part ‘B’.
• Loosen two screws on stopper hinge under, and then push the
door to contact the door seal to oven front surface.
• Tighten two screws.
NOTE : A small gap may be acceptable if the microwave leakage does not exceed 4mW/cm
2
.
Содержание KOC-1B0K9A27
Страница 1: ...Service Manual Microwave Oven Convection Grill KOC 1B5K SEP 2008 ...
Страница 30: ...29 10 WIRING DIAGRAM ...
Страница 38: ...37 13 P C B CIRCUIT DIAGRAM A B ...
Страница 40: ...13 P C B CIRCUIT DIAGRAM 39 ...