7
Assembly Instructions
Unique Inventions Inc.
est 1984
559 Chamberlain St.
Peterborough, ON CANADA
www.uniqueinventionsinc.com
Items Packed in Box
1. Bucket with frame attached & Over Armour
2. Blade system
3. Side Tubes
4. Nose with foot support strap & velcro strap
5. Frame Stiffener
6. Plastic Skag
Tools Required
7/16” Wrench (Qty 2) 3/16” Allen Wrench (Qty 2)
3/8” Wrench 5/32” Allen Wrench
1/2” Wrench
1
2
3
4
5
6
1. Place blade system on bucket as shown. Be sure
Blade System is in front of seat frame / adjustable riser!
Insert side tubes. They are marked left and right
2. Tighten seat frame (All 4 bolts) If your
sledge came with an adjustable riser
tighten all 4 bolts on the riser.
Frame Stiffener
3. Slide frame stiffener onto side tubes. Slide foot support onto nose piece
and then insert nose piece into side tubes. Secure with bolts provided.
Once your balance point is found tighten the blade holders.
Foot Support Strap
