Unipulse F805AT-BC, Руководство по эксплуатации

Страница: 80 / 202

6.SETTING AND ADJUSTMENT OF READING
65
6-5-3. Weight density end point
Use this item to specify the full-scale value for weight density bar graph.
Operation
6-5-4. Feed rate end point
Use this item to specify the full-scale value for feed rate bar graph. The unit for this
value is either kg/h or t/h depending on the selection in [FEED UNIT].
Operation
6-5-5. Load ratio end point
Use this item to specify the full-scale value for load ratio bar graph.
Operation
6-5-6. Feed ratio end point
Use this item to specify the full-scale value for feed ratio bar graph.
Operation
Range: 1 – 99999 kg/m (5 digits, decimal place floating)
MODE GRAPH SETTING
→ →
WEI DENS END POINT
Range: 1 – 99999 (5 digits, decimal place floating)
MODE GRAPH SETTING
→ →
FEED RATE END POINT
Range: 0.01 – 999.99 % (5 digits, decimal place fixed)
MODE GRAPH SETTING → → LOAD RATIO END POINT
Range: 0.01 – 999.99 % (5 digits, decimal place fixed)
MODE GRAPH SETTING
→ →
FEED RATIO END POINT