Unipulse F805AT-BC, Руководство по эксплуатации

Страница: 72 / 202

6.SETTING AND ADJUSTMENT OF READING
57
6-2-9. I/O monitor display
The view as popup which can monitor the operation state of an external I/O signal by
pushing a specific domain is performed. Select Effect or inhibit.
- INHIBIT............. A view as popup is not performed.
- EFFECT ............. If a specific domain is pushed in a comparison screen, a pop-up
screen will be displayed.
In order to close a pop-up screen, please push the inside of a pop-up
screen.
A push on a specific domain will display a
pop-up screen.
The inside of a pop-up display becomes the
display interlocked with the operation state of
the output pin (17-24 and 42-49 pin) / input
pin (2-9, 11-14, 27-34, and 36-39 pin) of con-
trol I/O.
It is displayed by "
●
" at the time of ON, and
is displayed by "-" at the time of OFF.
A screen will be closed if a specific domain
is pushed into a pop-up display.
* In the state where the pop-up screen is displayed, if this setup is repealed with
a communication command etc., a pop-up screen will be closed.
Operation
specific
domain
pop-up
display
specific
domain
Options: INHIBIT, EFFECT
MODE FUNCTION
→ →
I/O MONITOR DISPLAY PAGE
→