i)
Place the wider end of the upper frames (15) on the narrower end of the lower
posts. Press firmly. During assembly, make sure the upper ends of the mounted
frames have the clips for hanging the safety net.
j)
Continue with the installation of the safety net.
UNI_TRAMPOLINE_05:
Insert the fiberglass rod (16) into the opening of the
net. Connect both ends with the socket (17). Assemble the circle thus formed
by hooking it successively to the post clamps. Secure the lower edge of the net.
To do so, alternately weave a rope between the opening of the net and the rim
of the mat. Secure the end firmly by tying it down.
UNI_TRAMPOLINE_06:
Slide the safety net covers over the tops of the posts.
Once the entire safety net is properly positioned, slide the covers down. Secure
the lower edge of the net. To do this, attach the opening of the mounting straps
to the rim of the mat.
CAUTION!
The installation of springs must be done in a certain sequence!
Installing the springs every 4th or 5th hole is recommended to avoid too much
load!
3.3.
Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
c)
Perform regular inspections of the unit checking technical fitness and any
damages.
d)
Use a soft cloth for cleaning.
DISPOSAL OF USED UNITS.
At the end of its useful life, this unit should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the unit,
operating instructions or packaging. The materials used in this unit are recyclable
according to their marking. You will be making an important contribution to
