Unipro UN-H1715DS-EA Скачать руководство пользователя страница 3

 

SERVICE INFORMATION

To obtain consistent performance over the life of this 
machine, read through these instructions and save for 
future reference.  If you require service, contact your 
dealer or the dealer’s authorized service provider.  
Always refer to your Limited Warranty for complete 
service information.

The model, type and serial number for the machine 
are indicated on the data plate on the side of the 
handle.  For prompt and complete service, refer to 
these numbers when inquiring about service.

IMPORTANT SAFETY INFORMATION

When using this floor machine, basic precautions 
should always be followed including the following:

READ ALL INSTRUCTIONS BEFORE USING 
THIS FLOOR MACHINE

WARNING:  ELECTRIC SHOCK 
CAN CAUSE SERIOUS INJURY 
OR BE FATAL.  READ THE 
FOLLOWING INSTRUCTION 
ON THE USE AND OPERATION 
OF FLOOR MACHINES

Ÿ

This floor machine is equipped with a safety lock 
and power switch triggers designed for your safety.  
Do not attempt to bypass or defeat the safety 
switch lock.  Never use any device to lock the 
power switch triggers in the “ON” position.

Ÿ

Do not leave the machine alone and unplugged.  
Unplug the machine before servicing or changing 
brushes or pads.

Ÿ

Do not allow this machine to be used as a toy.  
Close attention is necessary when used near 
children.

Ÿ

Do not leave the machine connected to an 
electrical outlet unattended.

Ÿ

Use only as described in this manual.  Use only 
with factory recommended attachments.

Ÿ

Do not use this machine with a damaged power 
cord or plug.  If the machine is not working 
properly or has been dropped, damaged or left 
outdoors, return to your service provider for 
inspection and repair before use.

Ÿ

Use care to keep the electric power cord away 
from sharp edges or corners.  

Ÿ

Keep the cord away from heated surfaces.

Ÿ

Connect only to properly grounded (3-wire) 
outlets. See Grounding Instructions on Page 4.

Ÿ

Do not use extension cords or outlets with 
inadequate current carrying capacity.

Ÿ

Turn off all controls before unplugging.

Ÿ

Do not unplug by pulling on the cord.  To 
unplug, grasp the plug and pull.

Ÿ

Do not handle the plug, cord, or floor machine 
with wet hands.

Ÿ

Wind the cord no tighter than necessary to retain 
it during storage.  See Cord Storage on Page 5.

Ÿ

Use extra care when working on or near stairs.

Ÿ

Do not use in conjunction with flammable or 
combustible liquids like gasoline, or use in areas 
where explosive vapors or dusts may be present.

Ÿ

Store the machine in a cool, dry area.

Ÿ

Keep your work area well lit.

Ÿ

WARNING: To avoid electrical shock, use 
indoors only.

UniPro Dual-Speed 

175 RPM / 320 RPM Floor Machine

Содержание UN-H1715DS-EA









Отзывы: