RUNNING MODE
The Laptimer will automatically turn to running mode when you pass the finish line.
When the finish line is passed for the first time, the display
shows 0:00:00 to indicate that the timer is started.
the
show
hich data
All data are updated in the display every 0.5 seconds. In
display set-up you can define which values you want to
in the lower part during the race. You can choose w
to show in the upper display with the
button.
The upper part of the display will always show one of the data not shown in the lower display, la
number and lap
p
time. Small icons will help you identify the value shown. Indication of the best lap
is done with the BEST icon above the lap time.
urrent lap time and best lap time (Delta time) / High value
When the Laptimer is passing the finish line, it is showing the
difference between the current lap and the best lap and its
nt la
shown for 5
conds before changing back to data display.
h
.
You can also turn both features of
Difference between c
position. In the shown example, the curre
p is 8.98
seconds better than the previous best lap and the current lap
is the best lap (in position 1) This information is
se
It is possible to turn this feature off in service mode, where
ighest values for the current lap instead of the delta time
f.
you can also choose to show the
PIT MODE
Pit mode is for analysing the data stored in the Laptimer.
Press
from either first lap mode or running mode to
ode, the Laptimer jumps to the best lap.
In this example, the best lap is lap #18. From this point, you
enter pit mode.
When entering pit m
can go two ways: If you press
you will go to the next
p (19 in this example). If you press the
la
button, the Laptimer jumps to lap # 1.
The BEST LAPTIME icon at the top indicates the best lap time. The
button changes the
data shown in the upper display.
changes between the high (maximum) and the low
(minimum) data values stored.
UNIPRO – The original Laptimer
19
