UNIPOWER
UP-2210R/P Hardware installation and configuration manual
68
B.
Measure site properties
In measure site settings you have several settings. You can also here highlight a row and get
information about the setting and edit the value.
Signalling
Signalling are always activated by factory default in the meters. That is not a function which can be
turned on/off. However, there are two parameters which can be set in the signaling when you have a
known frequency (not a harmonic) which you want to create trig for. For an exaplme 1070 Hz. These
two are Detection threshold and Ripple frequency. The event can be shown in the event viewer (see
Figure 71). Or as an event line in any graph (see Figure 72)
Figure 71
Figure 70
