INV2500-HS SERIES
MANUAL
16.4
To put a new inverter module in place, perform the following steps:
16.4.1
Make sure the input and output breakers of the new inverter module are in
the off (down) position.
16.4.2
Install the replacement inverter module in the shelf.
16.4.3
Replace the front retention panel by replacing the four Phillips screws.
16.4.4
Turn on the DC input breaker (up position).
16.4.5
After the Output OK LED comes on, turn on the AC output breaker
(up position).
16.4.6
All green LEDs on the inverter modules should now be on, indicating normal
operation.
17.0 MAINTENANCE
No routine maintenance is required on the INV2500-HS Series inverters except for a peri-
odic cleaning of dust and dirt around the front fans and rear ventilation holes. A small vacuum
nozzle should be used for this.
19
