UniPOS Duct Smoke Detector
УКВ
-02
Passport page 4
Revision 01.10 of 4
MAINTENANCE
The maintenance must be performed by an authorized person and includes
the service schedule of the device itself and the included in it fire detector and
remote indicator in accordance with their instruction manuals. Additional cleaning
the body of the duct detectoris is required.
CONDITIONS OF STORAGE, OPERATION AND TRANSPORT
1. Storage
o
Indoor
compartments
o
Strorage Temperature Range - from minus 10
о
С
to plus 40
о
С
o
Storage Relative Humidity - up to 65 %
2. Operation
o
Enclosed spaces where there are no aggressive fumes
o
Operating Temperature Range - from minus 10
o
C to plus 55
о
C
o
Operating Humidity Range - from 20% to 90% at 40
о
C
3. Transportation
Product has to be transported in closed vehicles in factory packaging.
WARRANTY
The warranty period is 18 months from the date of sale providing .
The manufacturer guarantees the normal operation of the device providing that the
installation requirements from this Instructional manualhave been observed.
Manufacturing company bears no warranty liabilities for damages caused by
mechanical damage, improper use of the device or amendments and modifications
made after production. The manufacturer carries a warranty liability only for
damages caused by company's negligence or fault .
UniPOS
47, “San Stefano” Str., 5800 Pleven, BULGARIA
phone +359 64 891111, +359 64 891 100, fax +359 64 891 110
e-mail: [email protected]
Mladost 1, bl.79B, entr.2, ap.17, 1784 Sofia, BULGARIA
phone/fax +359 2 9744469, +359 2 9743925
e-mail: [email protected]
www.unipos-bg.com
UniPOS Duct Smoke Detector
УКВ
-02
Passport page 1
Revision 01.10 of 4
DUCT SMOKE DETECTOR
TYPE YKB-02
К
(YKB-02A)
Instruction Manual 01.10
GENERAL DESCRIPTION
Duct smoke detector YKB-02 is designed to detect the presence of smoke in
airstream of ductwork sections or ventilating compartments by the smoke detector
mounted in it.
Depending on the type of the fire detector mounted , the
duct smoke detector is produced in two variants -
for Conventional Fire Alarm Systems (YKB-02K) and for
Addressable Fire Alarm Systems (YKB-02A).
In the device is mounted an optical-smoke fire detector type:
-FD8030 for Conventional Systems
or
-FD7130 for Addressable Systems
In order to conrol the condition of the integrated fire
detector, on the housing of the duct smoke detector is
mounted an outboard LED Remote Indicator RI31.
Fig.1
Product design is based on the laws of Aerodynamics.
Part of the air flow runs through the opening holes ( pos.7, Fig 4 ) of the inlet tube
( pos.8, Fig.4 ) and passes through the duct smoke detector as reduces its speed
and goes out through the outlet tube ( pos.9, Fig 4 ).The mounted mechanichal
filters stop the large particles from the airflow and thus they protect the sensitive
element of the fire detector from dust contamination.
In case of smoke in the main air conduit, part of this smoke goes through the duct
smoke detector and activates the fire detector. The latter sends signal to the Fire
Control Panel and the outboard Remote indicator.
TECHNICAL DATA
Speed of the airflow into the air conduit
- 0,5 ÷ 20 m/s
Existence of a mechanical filter of the input and the output - Yes
Base type of fire mounted detector - DB8000D (DB7100)
Type of the Fire Detector - FD8030 (FD7130)
Type of the mounted Remote Indicator - Rl31
Option for installation of different type smoke detectors - Yes
Dimensions (without the inlet tube , the outlet tube and the
nozzles)
(200x120x114)mm
Inlet tube dimensions ø22
х
200 mm
Outlet tube dimensions ø22
х
70 mm
Weight 1,3
kg
LABOUR PROTECTION REQUIREMENTS
The personnel authorized to conduct the mountage and the technical service should
be aware of the construction of the device its operational mode and the common
requirements of workplace security.
