UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
12
Revision 2.05
Of 107
Table 2
Means of control
Condition of the fire
control panel
Access
level
Operation
Button
Reset Fire
Fire condition
Level 2 To exit the Fire condition
Fire condition, phase
Fire condition stage I
Level 1
To force transition
from Fire condition stage
I
to
Fire condition stage II
Fire condition, phase
Fire condition stage I
Level 2
- upon activated outputs for fire condition –
to suppress the outputs;
- if no outputs for fire condition are
activated - to force transition to phase Fire
condition stage II
Button
Outputs
(no suppressed
outputs) or
(suppressed
outputs)
Fire condition, phase
Fire condition stage II
Level 2
- upon activated outputs for fire condition –
to suppress the outputs
- if no outputs for fire condition are
activated – to activate all suppressed
outputs
Button
Inspection
Fire condition, phase
Fire condition stage I
Levels
1 and 2
To add time period for inspection
Button
Stop Alarm
Fire condition and
Fault condition (with
the exception of Fatal
Fault Condition)
Levels
1 and 2
To suppress the local sounder
Button
Menu
Duty mode, Fire
condition, Fault
condition (with the
exception of Fatal
Fault Condition) Test
mode and Disabled
component
Level 1 To enter Information and Control mode
Information and
Control Mode
Level 1 To enter a selected menu
Information and
Control Mode
Level 2
Button
Enter
SetUp Mode
Level 3
А
- To enter a selected menu;
- To execute a selected command;
- To save a modified parameter
Information and
Control Mode
Levels
1 and 2
Button
Down
SetUp Mode
Level 3
А
To display the next element of the menu
Information and
Control Mode
Levels
1 and 2
Button
Up
SetUp Mode
Level 3
А
To display the previous element of the
menu
Information and
Control Mode
Levels
1 and 2
To exit Information and Control Mode
Button
Exit
SetUp Mode
Level 3
А
To exit SetUp Mode and reset the system
