- 2 -
Speed
Green
Off: Indicates the link through established at 10Mbps.
Blink: Indicates the link through established at 100Mbps.
Light: Indicates the link through established at 1000Mbps.
PoE
Orange
Off: No PoE powered device (PD) connected
Light: There is a PoE PD connected to be port, which
supply power successfully.
Blink: Indicates port abnormal power supply
DIP Switch
The DIP switch located on the left panel, the default is closed. the CCTV function, When switch toggle to OFF,
all ports can communicate with each other. When DIP switch toggle to ON, 1-16 port can be isolated each other,
but 1-16 port can connect to 17T/S ,18T/S port after open CCTV to stop broadcast storm to increase forwarding rate
of frame.
Rear Panel
The rear panel of 16FE(PoE)+2G TP/SFP Combo PoE Switch indicates an AC inlet power socket, Grounding Column.
Installation the Switch
This part describes how to install your Ethernet Switch and make connections to it. Please follow the following instructions
in avoid of incorrect installation causing device damage and security threat.
Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet cloth or liquid;
Do not place the switch near water or any damp area. Prevent water or moisture from entering the switch chassis;
Do not place the switch on an unstable case or desk. The switch might be damaged severely in case of a fall;
Ensure proper ventilation of the equipment room and keep the ventilation vents of the switch free of obstruction;
Make sure that the operating voltage is the same one labeled on the switch;
Do not open the chassis while the switch is operating or when electrical hazards are present to avoid electrical shocks.
