11
SP-2100 Smartphone Bluetooth Barcode Scanner Reference Manual
Charge SP-2100 Battery
Prior to using the KDC, you must charge its battery fully. To charge the battery, follow these
directions.
1. Connect the SP-2100 cable to the mini USB connector on the SP-2100
2.
Connect the SP-2100 cable to USB connector on your computer.
3. Your SP-2100 battery will begin charging. Then you can directly see the battery charging on the
LCD window and if you need to check exactly how much battery is charging now, you can
check the actual battery fuel by entering to the System Menu
Battery.
Approximate Time to Charge for SP-2100 Battery
SP-2100-1D
SP-2100-2D
REMARKS
2 Hours and Half
2 Hours and Half
Capacity : 1,450mAh
How many barcodes can a fully charged SP-2100 scan?
Language
Standard
(ex: USA / EU / Asia countries)
Bespoke
(ex: Japan)
Scan Byte
2Kbyte
250byte
Scan & Store
About 3,750
About 30,000
The SP-2100 can scan more than 30,000 barcodes when fully charged. And the capacity of stored
data by SP-2100 can be different depends on each countries scan Byte like above chart.
BATTERY CHARGING & READING BARCODES
