2/3
DEUTSCHE UHRMACHERKUNST.1893
CONGRATULATIONS
Congratulations on your choice of a watch by UNION
GLASHÜTTE/SA.
®
- a German brand among the most
renowned and with the richest traditions.
This exceptionally designed, undeniably attractive timepiece
also has a superior design quality. Using only the highest value
materials and components, your UNION GLASHÜTTE/SA.
®
watch is protected against shocks, temperature variations,
water and dust.
Its sapphire crystal has a double sided anti-reflective coat-
ing, and it is driven by a mechanical movement chronograph
U 7750 with automatic winding and day and date indicator.
To ensure perfect and accurate running for many years to
come, we recommend you attentively follow the advice given
in these instructions.
We hope you will be very pleased with your UNION
GLASHÜTTE/SA.
®
timepiece !
USE
Winding
Crown in position
I
, not pulled out
Manual winding is necessary if you have not worn your watch
for some considerable period of time. To restart it, you only
need to turn the crown a few times (clockwise), or to tilt
your watch from side to side a few times. To restore your
watch's 46 hour power reserve, around 32 turns of the
crown (forward) are required.
When wearing your watch, the automatic device winds it
every time you move your wrist.
Notes
The accuracy may be influenced by the wearing conditions.
There is no stop of the crown at full winding.
Setting the time
Crown in position
III
, pulled out
Pull the crown out to position
III
carefully; the seconds
hand (
3
) will stop. Turn the crown forwards or backwards to
set the desired time.
Once the hour hand passes the 12 o'clock position, you can
see if it is indicating midnight (date and day will change) or
midday (date and day will not change).
Advice on how to synchronise your watch
To synchronise the seconds hand (
3
) with an official time
signal (radio/TV/Internet), pull out the crown to position
III
;
the seconds hand will stop. At the signal, push the crown back
into the rest position
I
.
Day and date correction
Crown in position
II
, intermediate
Pull the crown out to position
II
, turn it forwards to set the
date or backwards to set the desired day and then push
it back into the rest position
I
. During this operation, your
watch will continue running, so the time will not need to be
re-set.
Important
Never correct the date and/or day between 8 p.m. and 2 a.m.;
the movement is changing the date and the day.
Chronograph function
Press the Start/Stop push-button (
9
) to start the chrono-
graph. Press the Start/Stop push-button (
9
) again to stop
it. The chronograph will resume if the Start/Stop push-
button (
9
) is pressed again (added times), or the three
chronograph hands (
5
,
6
and
7
) will return to zero if push-
button (
10
) is pressed.
www.union-glashuette.com
U-7750_EN / 2013
U-7750