Union INCA1021, Перевод оригинальной инструкции по эксплуатации

Страница: 26 / 65

Transport, setup and acceptance
26
Analogue outputs
Fig.
5
.
5
: Analogue output X11A, connections
Item
No.
Function
Item
No.
Function
1 Output 1 – signal/signal 4-20 mA 5 Output 5 – signal/signal 4-20 mA
– 1 GND – 5 GND
2 Output 2 – signal/signal 4-20 mA 6 Output 6 – signal/signal 4-20 mA
– 2 GND – 6 GND
3 Output 3 – signal/signal 4-20 mA 7 Output 7 – signal/signal 4-20 mA
–
3 GND
–
7 GND
4 Output 4 – signal/signal 4-20 mA 8 Output 8 – signal/signal 4-20 mA
– 4 GND – 8 GND
With optional equipment with analogue outputs, assignment is by factory as follows:
Assignment of analog interface configurable with Software INCACtrl.
The load resistor is 500 ohm.