Union Community UBio-X Pro Lite Скачать руководство пользователя страница 14

Страница: 14 / 79

UBio-X Pro Lite User Guide

UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code : 05836)

Tel : +82-2-6488-3000, Fax : +82-2-6488-3099

E-Mail :[email protected]; http://www.unioncomm.co.kr



Face authorization method

You can select two modes as the face authorization method.

- Normal mode: When the user gets close within 1.5m, the tilting function of the camera

is operated by recognizing the face of user. When the user is within 50~70cm, the

face authorization is fulfilled.

- Fixed mode: It has the fastest authorization speed, but because it does not include the

tilting function, please locate the user face at the LCD guideline by maintaining the

distance between the terminal and user in 50 cm.



Notes

- It is recommended to register and authorize at the location where the terminal is

installed.

- If you pose differently with the registered face, the recognition rate of face can

decrease. It is good to locate the full face as much as possible

- The thick glasses frame or sun-glasses can decrease the recognition rate of face



Cautions in the installation

- Be sure to install the terminal indoor.

- Do not install under the light bulb.
- Not recommended in the circumstance of backlight or direct light.

1.7. Proper fingerprint registration and input methods



Correct fingerprint registration methods

Place your index finger on the window just as you do with a finger stamp.

Do not use the tip of the finger.

Make sure the center of your finger touches the window.

(Please be cautious that you may result in low temperature burns when inserting finger.)



Use your index finger if possible, it is the easiest for orientation and guarantees a stable

input method. Using the thumb or baby finger can be awkward and may result in a bad

image.

Содержание UBio-X Pro Lite















































































Результаты поиска

Содержание UBio-X Pro Lite

Отзывы:

Похожие инструкции для UBio-X Pro Lite

Бренды по названию

Популярные бренды

Union Community UBio-X Pro Lite, Руководство пользователя

Результаты поиска

Содержание UBio-X Pro Lite

Отзывы:

Похожие инструкции для UBio-X Pro Lite

Бренды по названию

Популярные бренды