8. Remove the support plate along with its rear contact.
9. Remove the developer roller.
10. Remove the four screws shown that hold the doctor blade
in place. Note the location of the doctor bar. It must be
positioned in the same manner for reassembly.
11. Remove the doctor blade contact which runs along the
side of the cartridge.
LEXMARK C520
•
522
•
524
•
530
•
534
•
734
•
736
•
738 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
