Uninet icolor 600, Руководство пользователя

Страница: 17 / 25

17
UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com
www.icolorprint.com
Printing with Fluorescent Colors
To convert your printer to fluorescent colors, swap out the cyan, magenta and yellow STD color cartridges
with your fluorescent colors. If operating in “B” configuration, insert the cyan fluorescent in the first slot. The
magenta and yellow go in their normal slots. The white toner is already fluorescent and just stays in place.
It is highly recommended that you use the fluorescent cartridges in “A” configuration with the black cartridge
installed for best results. Fluorescent toners, by their nature, are very bright and cannot create accurate
composite black. If white is needed anywhere on the image, it is suggested that you run the graphic through as
a 2
nd
pass to ensure accurate colors.
If operating in “B” configuration for one pass printing, check your image to ensure there is no black in the
image at all (No 100%K, or any composite black colors). When in the “B” configuration, the TransferRIP
software will take any black color and automatically make a specific composite black color using the C, M, & Y
colors which will produce undesirable results.
Most fluorescent images will be placed on a black or dark colored garment, so black would not be suggested in
these cases anyway.
Ask your dealer about upgrading to security and clear toner options as well!
Use Geniune UniNet iColor
®
Consumables
Only use genuine UniNet iColor® consumables. The use of incompatible supplies (toner, drums, transfer belts,
fusers) will cause damage to your printer not covered by your warranty.