manualshive.com logo in svg

Uninet iColor 350, Руководство пользователя, Страница: 18 / 38

Поделиться
Скачать
Uninet iColor 350 Скачать руководство пользователя страница 18

 

18 

UniNet iColor Printing Solutions

 | 

[email protected]

 | www.icolorprint.com 

 

5. Using the up/down keys, select [Wi-Fi Config.], and then press the [OK] key. 
6. Using the up/down keys, select [Wi-Fi], and then press the [OK] key. 
7. Using the up/down keys, select [Active], and then press the [OK] key.  
8. Press the [Menu] key to return to the Initial screen. 
9. Turn off the printer, and then turn it back on. 
10. Press the [Menu] key. 
11. Using the up/down keys, select [Host Interface], and then press the [OK] key. 
12. Using the up/down keys, select [Network Setting], and then press the [OK] key. 
13. Using the up/down keys, select [Wi-Fi Config.], and then press the [OK] key. 
14. Using the up/down keys, select [Setup Wizard], and then press the [OK] key. 
15. Using the up/down keys, select SSID of the router (access point) from the searched SSID list, and then 
press the [OK] key. 
16. Using the up/down keys, select the authentication method, and then press the [OK] key. 
 
The next steps differ depending on the authentication method that you have selected. Proceed to Step 17 of 
either section A or B. 

Section A - Connecting to devices using the WPA2-PSK or Mix Mode WPA2/WPA authentication 

 

17. Enter the encryption key (Passphrase) using the up/down keys, and then press the [OK] key.  

 

As the passphrase, you can enter either 8 to 63 ASCII characters (0x20-0x7e) or 64 hexadecimal digits 
(0-9, A-F, a-f). 

 

To go to the next characters, press the [OK] key. 

 

Press the [Escape] key to clear all characters. 

18. Display will read ‘Connect?: Yes/No’. Press the [OK] key. After connecting to the network, the Wi-Fi screen 
is displayed. 
19. Using the up/down keys, select [Wi-Fi Status], and then press the [OK] key. When "Connected" is 
displayed, the connection has been established. If "Disconnected" is displayed, the connection has not been 
established. Start again from the beginning. 
 

Section B - Connecting to the devices using the Open System or Shared Key authentication 

 
17. Using the up/down keys, select the encryption method, and then press the [OK] key. The maximum 
number of characters that can be entered in the encryption key field depends on the encryption method 
settings. 

 

Do not select [None] except in special circumstances. If selected, the security system will not work. 

18. Enter the encryption key using the up/down keys, and then press the [OK] key. 

 

To go to the next characters, press the [OK] key. 

 

Press the [Back] key to clear all character. 

19. Enter the ID using the up/down keys, and then press the [OK] key. The ID is used for identifying the 
encryption key. You can register four encryption keys (ID 1 to 4). 
20. Display will read ‘Connect?: Yes/No’. Press the [OK] key. After connecting to the network, the Wi-Fi screen 
is displayed. 
21. Using the up/down keys, select [Wi-Fi Status], and then press the [OK] key. When "Connected" is 
displayed, the connection has been established. If "Disconnected" is displayed, the connection has not been 
established. Start again from the beginning. 

Содержание iColor 350







































Отзывы:

Нет отзывов